COVID-19 Recovery Assistance Services
INDOOR AIR QUALITY, SURFACE DECONTAMINATION & WORKER HYGIENE

Whether you are looking for portable or continuous area instruments for indoor air quality analysis, Airborne SARS CoV-2 sampling and analysis, COVID-19 surface cleanliness testing, passive or active sampling of disinfectants, we have the services and equipment to assist in the COVID-19 recovery.

See our complete list of COVID-19 Recovery services below, then fill out the Solutions & Quote Form at the bottom of this page or contact our expert client service representatives via chat or phone for instant answers.

SARS-CoV-2 FOR AIR & SURFACE

RT-qPCR Testing – Air

SGS provides everything you need for collecting air samples for SARS CoV-2 including pumps, media and accessories.

RT-qPCR Testing – Lab

SGS provides environmental sampling kits with RNA-preservation and RT-qPCR lab-based testing for the presence of SARS-CoV-2. This validated method provides the highest level of confidence for validation of surface decontamination.

Find more RT-qPCR info in our COVID-19 Testing Guide (pdf)

RT-qPCR Testing – Portable

Our RT-qPCR analyses are available in the lab, and soon, in the field. Whether you need full-fledged mobile support, or instrument rental/analytical support, our qPCR services are flexible while still providing the same level of sensitivity and specificity.

SARS-CoV-2 BY MICROBIOLOGY

ATP Screening – Semi-quantitative

Our Hygiena Ensure Luminometer with the Supersnap Test Kit provides a quick and sensitive screening level estimate of ATP on a surface using ATP equipment that is familiar to most industry professionals.

Find more ATP info in our COVID-19 Testing Guide (pdf)

ATP Testing – Quantitative 2nd Generation

Our premium, 2nd-generation ATP test from Luminultra ensures high-quality, quantitative ATP field results (pg/cm2) while maximizing ATP extraction efficiency and minimizing interference from cleaning and disinfection agents.

Find more ATP info in our COVID-19 Testing Guide (pdf)

Microscopic Lift Testing

Our surface sampling kits provide a unique approach to particulate sampling and analysis. Each kit contains 5 ready-for-use microscope slides prepared with a specially formulated transparent tape to effectively identify dust components during an IAQ evaluation survey.

Find more Microscopic Lift Testing info in our COVID-19 Testing Guide (pdf)

SARS-CoV-2 AIRBORNE DISINFECTANTS

Passive Sampling – Area/Personal Mod. OSHA ID-188/ID-164; ISE
Active Sampling – Area/Personal
Mod. OSHA ID-188/ID-164; ISE
Portable Instruments – Area/Personal ToxiRae Pro Single Gas
Continuous Area Monitors – Area RKI GD-70D-NH3
Active Sampling – Area/Personal
Mod. NIOSH 6011; IC
Portable Instruments – Area ToxiRae Pro Single Gas
Continuous Area Monitors – Area RKI GD-70D-CL2
Web-Based Continuous Area Monitors – Area Smart Sense RKI CL2
Active Sampling – Area/Personal
Mod. NIOSH 6011; IC
Portable Instruments – Area ToxiRae Pro Single Gas
Continuous Area Monitors – Area RKI GD-70D-CL2
Web-Based Continuous Area Monitors – Area Smart Sense RKI CL2
Passive Sampling – Area/Personal Mod. NIOSH 1400; GC/FID BADGE
Active Sampling – Area/Personal
Mod. NIOSH 1400; GC/FID
Active Sampling – Area/Personal Mod. OSHA 5001: GC/FI
Passive Sampling – Area/Personal Mod. OSHA 1007; HPLC/UV
Active Sampling – Area/Personal
Mod. NIOSH 2016; HPLC/UV
Active Sampling – Area/Personal Mod. NIOSH 7907
Active Sampling – Area/Personal
Mod. OSHA ID-165SG; IC
Passive Sampling – Area/Personal Mod. OSHA VI-6; Colorimetric
Active Sampling – Area/Personal
Mod. OSHA 1019; Colorimetric
Portable Instruments – Area
RKI Eagle
Continuous Area Monitors – Area RKI GD-70D-H2O2
Web-Based Continuous Area Monitors – Area SmartSense H2O2
Passive Sampling – Area/Personal Mod. NIOSH 1400; GC/FID BADGE
Active Sampling – Area/Personal
Mod. NIOSH 1400; GC/FID
Active Sampling – Area/Personal Mod. OSHA 5001: GC/FID
Portable Instruments – Area/Personal ToxiRae Pro Single Gas
Continuous Area Monitors – Area RKI GD-70D-NH3
Web-Based Continuous Area Monitors – Area Smart Sense RKI NH3
Passive Sampling – Area/Personal Mod. OSHA ID-ID-214; IC
Active Sampling – Area/Personal
Mod. OSHA ID-ID-214; IC
Portable Instruments – Area BW Technologies GasAlert Extreme Ozone Meter
Continuous Area Monitors – Area RKI GD-70D-O3
Web-Based Continuous Area Monitors – Area Smart Sense RKI 03
Active Sampling – Area/Personal
In-House: LC-SOP-57; HPLC/UV
Passive Sampling – Area/Personal Mod. NIOSH 1022; GC/FID BADGE
Active Sampling – Area/Personal Mod. NIOSH 1022; GC/FID

SARS-CoV-2 WATER QUALITY TESTING

SARS-CoV-2

Understanding the change in concentration of SARS-CoV-2 RNA at a site over time can provide an early warning of a Covid-19 community outbreak before individuals become symptomatic or remain asymptomatic. Coupled with delays in human testing and receiving results, wastewater testing could provide up to 7-days early notice of an outbreak. quantitative wastewater testing for SARS-CoV-2 viral RNA. Testing can be performed at the community level from a wastewater treatment plant inflow, or individual buildings in healthcare, industrial, workplace or university settings.

Lead

Buildings that have been closed for extended periods of time can have water quality issues around stagnation and contaminant build-up. SGS offers a comprehensive set of services including lead, legionella, and other critical water quality parameters.

Legionella

Buildings that have been closed for extended periods of time can have water quality issues around stagnation and contaminant build-up. SGS offers a comprehensive set of services including lead, legionella, and other critical water quality parameters.

Indoor Air Quality Testing & Monitoring Solutions

Your One Stop for IAQ Testing and Monitoring Solutions
SGS provides the full range of testing to identify pollutants inside buildings.
Learn More >

Mobile Laboratory for COVID-19 Services >

SGS is adding to our comprehensive COVID-19 Recovery Assistance Services by coming directly to your location with our team, analytical expertise, and rental offerings. Our mobile laboratory and field-deployable testing and analytical equipment are now available for SARS-CoV-2 detection in air as well as on surfaces. Learn More >

   

Smart Sense Continuous Monitoring With Sample Capture

Smart Sense, SGS’s state-of-the-art continuous monitoring system, is ideal for CO2 and aerosol monitoring that lets you know, over time, if ventilation is sufficient to provide clean indoor air. In combination with our SARS-CoV-2 method, SmartSense provides real-time measurements for indoor air quality and automated activation of the SmartSense sample capture system for SARS air sampling. Learn more >   

To find out how we can best help you with your Covid-19 recovery and all your environmental analysis needs,call +1 800 329 0204 or email EHS.Clientcare@SGS.com. We look forward to hearing from you soon.